View DVCR4763LF_4772978.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SURFACE MOUNT
Cylindrical leadless type for surface mounting Low cost, general purpose, 2000 hours at 85 New expanded CV Range Anti-solvent (2 minutes) Designed for automatic mounting and reflow soldering
ELECTROLYTIC - 5C DVCR
SECTION 1
SPECIFICATIONS
Item Tolerance of Rated Capacity (%) Leakage Current (A) Tangent of Loss Angle (tan) Performance 20 Less than 0.01CV or 3 whichever is larger (after 2min) C: rated capacitance (F) Rated Voltage (V) tan (max) O3 O4 to O6.3 O8 to O10 Characteristics at high and low temperatures Rated Voltage (V) Impedance O3 Z-25C / Z+20C Z-40C / Z+20C O4 to O6.3 Z-25C / Z+20C Z-40C / Z+20C O8 to O10 Z-25C / Z+20C Z-40C / Z+20C Endurance (85C) (Applied Ripple Current) Test Time Leakage Current Percentage of Capacitance Change Tangent of Loss Angle Shelf Life (85C) Applicable Standards 4 6.3 10 16 25 35 0.14 0.12 0.12 35 2 3 2 3 2 3 50 0.12 0.10 0.10 50 2 3 2 3 2 3 63 - - 0.10 63 - - - - 2 3 100 - - 0.10 100 - - - - 2 3 0.42 0.30 0.24 0.22 0.16 0.42 0.28 0.24 0.20 0.14 - 4 7 17 7 15 - - 0.28 0.24 0.20 0.14 6.3 4 10 3 8 4 8 10 3 8 3 5 3 5 16 2 6 2 4 2 4 25 2 4 2 3 2 3
Category Temperature Range (C) -40 to +85
2000 hours The initial specified value or less Within 20% of initial value (4wv 30%) 200% or less of the initial specified value (4wv: 3000%)
Test Time: 1000 hours: other items are the same as those for endurance. JIS C5101-1 JIS C5101-1, -18 1998 (IEC600384-1 1992, -18 1993)
COEFFICIENT OF FREQUENCY FOR RATED RIPPLE CURRENT
Frequency (Hz)/Rated Voltage 4 to 16 25 to 35 50 to 63 100 50-0 0.8 0.8 0.8 0.7 10 1 1 1 1 1k 1.15 1.25 1.35 1.35 10k - 100k 1.25 1.40 1.50 1.50
ORDERING INFORMATION DVCR
Range
7
Capacitance F
.
Voltage Can Size Small = Blank D8 = 8mm dia D10 = 10mm dia
LF
Lead Free
7
Fax: 01371 875075
www.dubilier.co.uk
Tel: 01371 875758
SURFACE MOUNT
SMD - 5C REDUCED SIZE DVCR
RANGE & CASE SIZE DO X Lmm
DVCR47025-LF
25
470
0.49
458
10X10
0.3 Max
10
10 +/- 0.5
10.4
10.4
3.3
0.3 Max
SECTION 1
Part No.
W.V (V.DC)
Cap (uF)
ESR Ripple Current Size (120Hz/+20C) (120Hz/+105C) dia/height max (mA) rms max 32 3.2 21 21 15 7 4.6 2.6 2.1 0.99 0.46 18 7.8 4 1.8 0.34 37 33 20 15 13 7.1 6.3 3.3 2.9 2 1 0.71 57 30 14 9 6.4 4.4 3 1.1 0.7 14 110 31 28 34 58 83 88 139 252 458 39 54 98 155 458 18 26 30 44 44 75 74 103 109 144 252 252 11 23 43 54 75 90 124 252 458 3X5.5 6.3X5.5 4X5.5 4X5.5 4X5.5 5X5.5 6.3X5.5 6.3X5.3 6.3X8 8X10 10X10 5X5.5 5X5.5 6.3X5.5 8X6.5 10X10 3X5.5 4X5.5 4X5.5 5X5.5 5X5.5 6.3X5.5 6.3X5.5 6.3X5.5 6.3X8 6.3X8 8X10 8X10 3X5.5 4X5.5 5X5.5 5X5.5 6.3X5.5 6.3X5.5 6.3X8 8X10 10X10
Part No.
W.V (V.DC)
Cap (uF)
ESR Ripple Current Size (120Hz/+20C) (120Hz/+105C) dia/height max (mA) rms max 106 70 42 20 11 7 4.9 3.4 2.3 0.91 50 42 17 9 6 4.2 1.7 10 7.5 5 3.5 2.4 1.7 16.6 7.5 5 8 9 20 34 47 67 54 109 120 458 19 20 44 59 82 98 458 166 139 139 226 226 226 94 189 189 3X5.5 3X5.5 4X5.5 5X5.5 5X5.5 6.3X5.5 6.3X5.5 6.3X8 6.3X8 10X10 4X5.5 4X5.5 6.3X5.5 6.3X5.5 6.3X8 6.3X8 10X10 4X5.5 8X10 8X10 10X10 10X10 10X10 8X10 10X10 10X10
DVCR224-LF DVCR2204-LF DVCR226.3D4-LF DVCR336.3-LF DVCR476.3-LF DVCR1006.3-LF DVCR1506.3-LF DVCR2206.3-LF DVCR3306.3-LF DVCR4706.3-LF DVCR10006.3-LF DVCR2210-LF DVCR6810-LF DVCR10010-LF DVCR22010-LF DVCR100010-LF DVCR1016-LF DVCR1016D4-LF DVCR2216-LF DVCR2216D5-LF DVCR3316-LF DVCR4716-LF DVCR6816-LF DVCR10016-LF DVCR15016-LF DVCR22016-LF DVCR33016-LF DVCR47016-LF DVCR4.725-LF DVCR1025-LF DVCR2225-LF DVCR3325-LF DVCR4725-LF DVCR6825-LF DVCR10025-LF DVCR22025-LF DVCR33025-LF
4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25
22 220 22 33 47 100 150 220 330 470 1000 22 68 100 220 1000 10 10 22 22 33 47 68 100 150 220 330 470 4.7 10 22 33 47 68 100 220 330
DVCR2.235-LF DVCR3.335-LF DVCR4.735D4-LF DVCR1035-LF DVCR2235-LF DVCR3325-LF DVCR4735-LF DVCR6835-LF DVCR10035-LF DVCR22035-LF DVCR3.350-LF DVCR4.750-LF DVCR1050-LF DVCR2250-LF DVCR3350-LF DVCR4750-LF DVCR10050-LF DVCR163-LF DVCR2263-LF DVCR3363-LF DVCR4763-LF DVCR6863-LF DVCR10063-LF DVCR10100-LF DVCR22100-LF DVCR33100-LF
35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 63 63 63 63 63 63 100 100 100
2.2 3.3 4.7 10 22 33 47 68 100 220 3.3 4.7 10 22 33 47 100 1 22 33 47 68 100 10 22 33
OUTLINE DRAWING
DO + B
L
W
DO
OD 3 4 5 6.3 8 8 L 5.3 +/- 0.2 5.3 +/- 0.2 5.3 +/- 0.2 5.3 +/- 0.2 6.5 +/- 0.3 10 +/- 0.5 A 3.3 4.3 5.3 6.6 8.4 8.4 B 3.3 4.3 5.3 6.6 8.4 8.4 I 1.5 2.0 2.3 2.7 3.4 3.0 W 0.45 to 0.75 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 0.8 1.0 1.5 2.0 2.3 3.1 4.7
B + I P I
L
W
A
I
I P 2.0 +/-0.5
7
Fax: 01371 875075
www.dubilier.co.uk
Tel: 01371 875758
SURFACE MOUNT
TAPING SPECIFICATIONS FOR DVCR & DVJL + DVJR, DVJRHVX, DVCNP
TAPE SPECIFICATION
SECTION 1
380 = 380mm real size 330 = 330mm real size
330/380
75
Fax: 01371 875075
www.dubilier.co.uk
Tel: 01371 875758

▲Up To Search▲

Price & Availability of DVCR4763LF

	To Download DVCR4763LF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .